New Design of 12-Lead ECG Simulation Signal System with Simulated Noise Added
Duong Trong Luong1, Nguyen Duc Thuan2, Nguyen Thai Ha3
1PhD. Candidate Duong Trong Luong, Department of Electronics Technology and Biomedical Electronics Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam.
2Prof. Nguyen Duc Thuan, Department of Electronics Technology and Biomedical Electronics Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam.
3Dr. Nguyen Thai Ha, Department of Electronics Technology and Biomedical Electronics Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam.
Manuscript received on January 02, 2014. | Revised Manuscript received on January 04, 2014. | Manuscript published on January 05, 2014. | PP: 126-130 | Volume-4 Issue-6, January 2014. | Retrieval Number: F2485014615/2015©BEIESP
Open Access | Ethics and Policies | Cite
© The Authors. Published By: Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper presents a simulation system design of 12-lead electrocardiogram (ECG) signal.The simulated ECG signal is generated in analog form and can be added to certain types of noise such as simulated 50Hz power line noise or baseline wander.The original 12-lead ECG signal was taken from database on www.phisyonet.org website. Adding noise signals, selecting leads and signal display are performed by our designed software. The accuracy of simulated ECG signal is estimated by Mean Square Error (MSE) criterion. The proposed system was tested and showed the good results . The system can be used for testing designed circuits or can test actual clinical effect ECG devices. The designed system can supply convenient tools for Researchers, Designers in developing ECG products.
Keywords: 12-lead ECG signal, simulated signal, baseline noise, Mean Square Erro (MSE).