Effects of Array Parameters on FSS Structure of Dipole Array
R. K. Maity1, A. Roy2, S. Mukherjee3, T. K. Barik4, S. Bhunia5
1Raj Kumar Maity, Department of ECE, Haldia Institute of Technology, Haldia, India.
2Avisankar Roy, Department of ECE, Haldia Institute of Technology, Haldia, India.
3Surajit Mukherjee, Department of ECE, Haldia Institute of Technology, Haldia, India.
4Dr. Tarun Kumar Barik, School of Applied Science, Haldia Institute of Technology, Haldia, India.
5Dr. Sunandan Bhunia, Department of ECE, Haldia Institute of Technology, Haldia, India.
Manuscript received on January 01, 2013. | Revised Manuscript received on January 02, 2013. | Manuscript published on January 05, 2013. | PP: 363-366 | Volume-2, Issue-6, January 2013.
Open Access | Ethics and Policies | Cite
© The Authors. Published By: Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: This paper focuses on the study of the effects of the array parameters such as array spacing, length and width of the array element on the characteristics such as transmission coefficient, bandwidth of a Frequency Selective Surface (FSS) structure formed by uniform dipole array used in microwave frequency for communication. In this paper FSS structure of 20X20 half-wave dipole elements has been studied. Electromagnetic wave equations are solved by Method of Moment (MoM) and mathematical formulation has been programmed using MATLAB.
Keywords: Frequency Selective surface, Half-Wave dipole, Periodic Array.